F 150 4WD V8-4.6L VIN 8 (2010)
4WD vehicles
8. Loosely install the transmission insulator and retainer and the 4 bolts.
9. Position the transmission crossmember and loosely install the 2 transmission insulator and retainer nuts.
10. Install the 4 transmission support crossmember bolts and nuts.
-
Tighten the transmission insulator and retainer bolts to 90 Nm (66 lb-ft).
-
Tighten the transmission crossmember bolts and nuts to 90 Nm (66 lb-ft).
-
Tighten the transmission insulator and retainer nuts to 103 Nm (75 lb-ft).
11. Install the bolt for the LH isolator cap bolt.