F 150 4WD V8-4.6L VIN 8 (2010)
![background image](/ford/f_150_4wd/v8-4.6l_vin_8/Page-1533013.png)
16. Make sure the transmission fluid is at the correct level, follow the steps for Adding Additional Transmission Fluid or Removing Transmission
Fluid. For additional information, refer to Transmission Fluid Drain and Refill See: Service and Repair/Procedures/6R80/Transmission Fluid
Drain and Refill.
17. For vehicles equipped with a 4.6L or 5.4L engine, if a new or existing mechatronic assembly is installed, the TCM will need to be programmed
with the latest calibration.
18. Perform Road Test - Adaptive Drive Cycle after downloading the latest calibration. For additional information, refer to Shift Point Road Test See:
Transmission Control Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/6R80/Shift Point Road Test.