F 150 4WD Pickup V8-281 4.6L VIN W EFI (1997)
11. Position the clamp protector and the inboard boot clamp on the inboard CV joint housing.
12. Fill the inboard CV joint housing with 235 grams of grease.
-
Use High Temp Constant Velocity Joint Grease E43Z-19590A provided in the boot kit meeting Ford specification ESP-M1C207-A.
13. Position the inboard CV joint housing and install the retaining ring.
14. Remove any excess grease from the mating surface and position the inboard front wheel driveshaft joint boot.
15. Adjust the CV joint-to-boot spacing to specification.
