F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
1. CAUTION: Do not drill out the overdrive servo bleed orifice to clean, or damage to the transmission will occur.
Some transmission cases will have this overdrive speed bleed orifice. If equipped with an overdrive servo bleed orifice, inspect for blockage. If the
bleed orifice is blocked clean the orifice by using short bursts of compressed air to clean out the foreign material.
2. Install the overdrive servo piston assembly.
1. Install the overdrive servo piston return spring.
2. Install the overdrive servo piston assembly.
3. Use the special tool to install the overdrive servo piston retaining ring.
4. Install the main control valve body.
Reverse Servo Assembly
Reverse Servo Assembly
