F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
7. CAUTION: Discard outer manual control lever shaft nut. Do not reuse. The old nut will not retain torque specification.
Remove the manual control lever.
1. Remove the outer manual control lever shaft nut.
2. Remove the manual control lever.
8. Remove the digital transmission range TR sensor.
1. Remove the two bolts.
2. Remove the digital TR sensor.
9. Remove the manual control valve detent lever spring.
1. Remove the bolt.
2. Remove the manual control valve detent lever spring.
10. NOTE: Use a shop cloth to protect the transmission case surface.
