F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Clutch Master Cylinder: Service and Repair
Clutch Master Cylinder/Reservoir
Removal
NOTE: When replacing clutch master cylinder, remove tubing from vehicle for bench bleeding procedure.
1. Disconnect the clutch master cylinder push rod from the clutch and brake pedal pivot shaft lever.
2. Disconnect the clutch pedal position switch (CPP).
3. Remove the pushpins.
4. WARNING: The electrical power to the air suspension system must be shut off prior to hoisting, jacking, or towing an air suspension
vehicle. This can be accomplished by turning off the air kick panel area. Failure to inflation of deflation of the air springs which may
result in shifting of the vehicle during these operations.
Raise and support the vehicle.
