F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
5. Install the special tool over the disc and differential clutch pack.
6. Install the nut of the gauge over the top and base stud.
7. NOTE: Selective shims shown are available as part of the Clutch Pack Replacement Kit F5AZ-4947-BA.
Use the Feeler Gauge and select the thickest blade that will center between the tool and the differential clutch pack. The reading will be the
thickness of the new clutch shim.
Selective Shims
8. Remove the special tool from the clutch pack and side gear assembly.
9. Install shims on the clutch pack and side gear assembly.
