F 150 4WD Pickup V8-5.4L CNG VIN M (2001)
Special Tool(s)
Disassembly
1. Remove the differential case.
2. -NOTE: The differential bearings need not be removed to overhaul the Ford limited slip differential. If bearing removal is required, use the 2-Jaw
Puller and the Step Plate.
NOTE: The anti-lock speed sensor ring cannot be reused once removed.
Remove the differential pinion shaft lock bolt, and remove the differential pinion shaft.
If required, remove the ring gear and anti-lock speed sensor ring.
3. Install the special tool in a suitable vise.