F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
7. NOTE: Use care when separating the seat cushion covering from the hook and loop fasteners to avoid tearing the fastener off the seat foam.
Separate the seat fabric from the cushion hook and loop fasteners.
8. Remove the hog rings from the center of the seat trim cover. Remove the seat trim cover from the foam pad.
ASSEMBLY
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the
disassembly procedure.
1. Position the seat trim cover on the foam pad. Install the hog rings in the center of the seat trim cover.
2. Stretch the seat fabric over the foam cushion while attaching the hook and loop fasteners.