F 150 Heritage 4WD Pickup V6-4.2L VIN 2 (2004)
3. WARNING: The metal edges of seat cushion pan can be sharp.
Attach the J-clips.
4. Install the front seat cushion assembly.
5. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the front seat
removal and installation procedure.
Install the front seat.
6. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS) deactivation/reactivation procedure.
7. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).
Rear Seat Cushion - Supercab
REAR SEAT CUSHION - SUPERCAB
DISASSEMBLY
1. NOTE: The 60 percent seat is shown. The 40 percent and captain's seat are similar.
Remove the seat.
2. Unclip the J-clip.
3. Remove the upholstery.
4. Remove the seat cushion pad from the frame.
ASSEMBLY
1. To assemble, reverse the disassembly procedure.