F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
Clutch Disc: Service and Repair
Special Tools
Removal
1. Remove the transmission.
2. If the parts are to be reused, mark the clutch pressure plate and the flywheel.
3. Remove the clutch pressure and clutch disc.
1
Remove the bolts.
2
Remove the clutch pressure plate and the clutch disc.
Installation
1. NOTE: The self-adjusting clutch pressure plate should always be adjusted before installation.
Compress the clutch diaphragm fingers.
1
Place (A) the flywheel and (B) the pressure plate in a press.
2
Use a (C) suitable adapter and press the (D) clutch diaphragm fingers until the adjusting ring moves freely.