F 250 2WD Pickup V8-5.4L CNG VIN M (1999)
2. Adjust the clutch pressure plate.
-
Rotate (A) adjusting ring counterclockwise until the (B) tension springs are compressed.
-
Hold (A) adjusting ring while releasing the pressure on the clutch fingers.
3. Position the (A) clutch disc on the (B) flywheel.
-
Use (C) Clutch Aligner to align the clutch disc.
4. NOTE: If reusing the clutch pressure plate and flywheel, use marks made during removal.
Position the clutch pressure on three dowels.
1
Align the clutch pressure plate.
-
Install the clutch pressure plate bolts.
2
Remove the Clutch Aligner.
5. Install the transmission.
6. Operate the vehicle to check clutch operation.