F 250 2WD Pickup V8-7.3L DSL (1990)
Crankshaft Gear/Sprocket: Service and Repair
Fig. 14 Timing Gear Alignment
1.
Remove front cover.
2.
Remove crankshaft drive gear, then the camshaft drive gear using tool T83T-6316-A or equivalent. When removing crankshaft drive gear, use
a breaker bar to prevent crankshaft rotation.
3.
Reverse procedure to install. Align timing marks as shown in Fig. 14. The crankshaft drive gear may be heated in an oven to 300-350° F, to
ease installation.
