F 250 2WD Pickup V8-7.3L DSL (1990)
Transmission Position Switch/Sensor: All Technical Service Bulletins
A/T - E4OD New Design Transmission Range Sensor
Article No.
95-6-19
03/27/95
TRANSMISSION - E4OD - NEW DESIGN TRANSMISSION RANGE SENSOR (TR) AND CONNECTOR INCLUDED WITH ALL E4OD
REMANUFACTURED TRANSMISSIONS
LIGHT TRUCK:
1989-94 ECONOLINE, F SUPER DUTY, F-150-350 SERIES
ISSUE:
Remanufactured E4OD Transmissions produced after 1/6/95 will include a new level Transmission Range Sensor and a vehicle wiring kit (Figure 1).
The MLP/TR sensor will be installed on the transmission. The vehicle harness connector must be installed prior to installing the transmission.
ACTION:
Install the vehicle wiring prior to installing a remanufactured transmission. Refer to the following Service Procedure for details.
SERVICE PROCEDURE
1.
Using a small dental pick or equivalent, remove the "red" pin separator from the old dual-tab MLP/TR sensor connector (Figure 3).
CAUTION:
