F 250 2WD Super Duty V10-6.8L (2009)
Condenser HVAC: Service and Repair
Condenser Core - 5.4L and 6.8L
Removal and Installation
NOTE: If an A/C condenser core leak is suspected, the A/C condenser core must be leak-tested before it is removed from the vehicle.
1. Recover the refrigerant.
2. Remove the condenser inlet and outlet fitting nuts and disconnect the fittings.
-
Discard the O-ring seals and gasket seals.
-
To install, tighten to 15 Nm (133 lb-in).
3. Detach the hood release cable pin-type retainer from the power steering cooler.
4. Remove the 2 power steering cooler bolts.
-
To install, tighten to 11 Nm (97 lb-in).
5. Position the power steering cooler aside.
