F 250 2WD Super Duty V10-6.8L (2009)
6. Remove the horn assembly bracket bolt and position the horn assembly aside.
-
To install, tighten to 11 Nm (97 lb-in).
7. Remove the 2 condenser bolts.
-
To install, tighten to 11 Nm (97 lb-in).
8. Remove the condenser core.
9. To install, reverse the removal procedure.
-
Install new gasket seals and O-ring seals.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
10. Evacuate, leak test and charge the refrigerant system.
