F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
![background image](/ford/f_250_4wd_ld_pickup/v8-5.4l_sohc_vin_l/Page-1480004.png)
9. Remove the coast clutch piston inner seal.
ASSEMBLY
NOTE:
-
Soak all friction clutch plates for 15 minutes in clean Motorcraft MERCON or MERCON V Automatic Transmission Fluid or equivalent
meeting FORD specification.
-
Prior to installation, lightly lubricate all O-ring seals with clean Motorcraft MERCON or MERCON V Automatic Transmission Fluid or
equivalent meeting FORD specification.
1. Install the coast clutch piston inner seal.
NOTE: Make sure the seal lip faces the coast clutch cylinder.
2. Install the coast clutch piston outer seal.
NOTE: Make sure the seal lip faces the coast clutch piston.
3. Install the coast clutch piston.