F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
6. Using the (A) Clutch Spring Compressor, compress the (B) direct clutch return spring assembly and install the (C) direct clutch return spring
retaining ring. Remove the tool.
CAUTION: Do not fully compress the return springs.
7. Alternately install the (A) steel and the (B) friction clutch plates, beginning with a steel plate and ending with the (C) direct clutch pressure plate.
CAUTION: Mixing or using friction plates without the grooves will cause shift concerns and can cause damage.
NOTE:
-
The direct clutch friction plates have lube grooves in the friction material.
-
Depending on model, install a 3-, 4- or 5- plate clutch pack.
8. Install the selective direct clutch pressure plate retaining ring.
9. Using a feeler gauge, check the stack-up clearance in three places, 120 degrees apart.