F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
53. Use Premium Long Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-M1C75-B to coat the thrust washer and position it on
the clutch gear.
54. Use Ford Black Silicone Rubber F4AZ- 1 9562-B or equivalent meeting Ford specification WSE-M4G323-A1 and ESE-M46195-A to fill the
groove in the front axle assembly.
CAUTION: Do not allow any silicone rubber to squeeze inside during assembly.
55. Assemble the front axle tube.
(1) Align the bolt holes and position the front axle tube assembly.
(2) Position axle identification tag.
(3) Install the bolts.
56. Examine the axle shaft seal and bearing surface for damage. If necessary, polish the bearing surface with fine crocus cloth.
