F 250 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Wiper Motor: Service and Repair
Windshield Wiper Motor
WINDSHIELD WIPER MOTOR
REMOVAL
1. Remove the cowl top vent panels.
2. Remove the wiper mounting arm and pivot shaft assembly.
1
Remove the five bolts.
2
Disconnect the electrical connector.
3
Remove the wiper mounting arm and pivot shaft assembly.
3. Remove the bolt and the windshield wiper linkage.
WINDSHIELD WIPER MOTOR
4. Remove the bolts and the windshield wiper motor.
INSTALLATION
To install, reverse the removal procedure.
