F 350 2WD Pickup V8-460 7.5L VIN G EFI (1997)
![background image](/ford/f_350_2wd_pickup/v8-460_7.5l_vin_g_efi/Page-1455007.png)
11. Install the bottom end cap.
NOTE: The top and bottom end caps are identical.
12. Install the (A) intermediate one-way clutch over the inner race. Install the (B) top end cap.
NOTE: The (A) lip on the intermediate one-way clutch must face upward.
13. Install the intermediate one-way clutch outer race.
NOTE:
-
The shoulder on the outer race must face upward.
-
When installed, the outer race must rotate counterclockwise.
14. Install the No. 8A intermediate brake drum thrust washer, engaging the (A) tabs with the (B) slots.