ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Right Side|Page 2170 > < Right Side|Page 2168
Page 1
background image

Valve Cover: Service and Repair
Left Side

Removal 

1. Disconnect the battery ground cable.
2. Remove the engine air cleaner and the air cleaner outlet tube.

3. Remove the crankcase ventilation tube from the valve cover.

4. Disconnect the LH fuel injector electrical connections and the LH ignition coil electrical connections.
5. Disconnect the fuel pressure regulator vacuum hose and lift the fuel charging wiring off the valve cover studs.

Right Side|Page 2170 > < Right Side|Page 2168