F 350 2WD Super Duty V10-6.8L VIN V (2005)
5. To install, reverse the removal procedure, using new fasteners.
Stabilizer Bar and Link - F-350, Dana Axle
Stabilizer Bar and Link - F-350, Dana Axle
Removal and Installation
CAUTION: Suspension fasteners are critical components because they affect performance of vital components and systems and their failure can
result in major service expense. Install new components with the same component number or an equivalent component if installation is necessary. Do
not use an installation component of lesser quality or substitute design. Torque values must be used during reassembly to make sure of correct
retention of these components.
NOTE: Super Duty F-350 Wide Frame shown, Super Duty F-350 Narrow Frame similar.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the nuts from both lower ends of the stabilizer bar links and remove the washers.
