F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
10. Place front wheel spindle on steering knuckle. Install nuts and tighten to 68-81 N.m (50-60 lb-ft).
11. Install the front disc brake hub and rotor on the front wheel spindle, inspecting the wheel bearings and grease seal, and making sure there is
adequate lubrication with High Temperature 4x4 Front Axle and Wheel Bearing Grease E8TZ 19590A or equivalent meeting Ford specification
ESA-M1C198-A.
12. Install bearing, locknuts, and hub locks. See: Steering and Suspension
13. Install the disc brake caliper See: Brakes and Traction Control/Disc Brake System/Brake Caliper.
14. Install the front wheel and tire. Install the wheel hub bolts (1107) and tighten to specification. Then adjust wheel bearings. See: Steering and
Suspension See Wheel Bearings.
15. Reverse procedure to install, then adjust wheel bearings. See: Wheel Bearing