F 350 4WD Pickup V8-7.3L DSL Turbo VIN F (1994)
CAUTION: Do not bend the sheet metal portion of the seal. Install the rolling diaphragm seal on the axle shaft. Seat the rolling diaphragm seal by
lightly tapping on the inner sheet metal lip of the seal with a seal installer, Driver Handle T83T-3132-A1, and a hammer to make sure that it is seated
squarely
7. Lightly coat the thrust face of the lips of the seal bore of the front wheel spindle and the rolling diaphragm seal on the axle shaft with High
Temperature 4x4 Front Axle and Wheel Bearing Grease E8TZ-19590-A or equivalent meeting Ford specification ESA-M1C198-A.
8. Carefully guide the axle shaft through knuckle and into the axle housing. Check that the splines of the axle shaft are engaged in the differential side
gear splines.
9. Install the front disc brake rotor shield on the steering knuckle