F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Installation
All vehicles
1. CAUTION: Align the index marks.
Position the driveshaft yoke on the transfer case flange.
Vehicles with split pin yoke
2. Remove the tape from the bearing cups.
3. CAUTION: Align the index marks.
Position the bearing cups in the rear axle pinion flange.
Vehicles with circular flange
4. CAUTION: Align the index marks.
Position the driveshaft yoke on the rear axle pinion flange.
All vehicles
