F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
5. CAUTION: Install new bolts.
NOTE: Bolt direction is vehicle application dependent.
Loosely install the four new bolts.
Vehicles with split pin yoke
6. CAUTION: Install new bolts and new retainers.
Install the two new retainers and four new bolts.
Vehicles with circular flange
7. CAUTION: Install new bolts.
CAUTION: The driveshaft yoke fits tightly on the rear axle pinion flange pilot. To make sure that the yoke seats squarely on the flange, tighten
the bolts evenly in a cross pattern as shown.
Install the four new bolts.
All vehicles
