F 450 2WD Super Duty V10-6.8L VIN S (1999)
5. Twist and unlock the slave cylinder from the transmission.
6. Lower the vehicle.
7. Remove the clutch master cylinder reservoir and clutch master cylinder.
-
Rotate the clutch master cylinder 45 degrees clockwise.
8. Clean all clutch master cylinder components.
9. Inspect the clutch master cylinder for:
-
damage to any reservoir components.
-
damaged cups.
-
scored piston.
Installation
1. Bleed the clutch hydraulic system See: Clutch Fluid/Service and Repair.
2. Install the clutch master cylinder.
-
Rotate the clutch master cylinder 45 degrees counterclockwise.