F 450 2WD Super Duty V10-6.8L VIN S (1999)
3. Install the pushpins.
4. Install the clutch pedal position switch.
-
Position the clutch pedal position switch in the 1 o'clock position.
-
Position the clutch pedal position switch on the clutch master cylinder push rod.
-
Install the dust cover.
5. Connect the clutch master cylinder push rod.
-
Install the new push rod bushing into the push rod.
-
Install the clutch master cylinder push rod to the pedal pin.
6. Raise and support the vehicle.
7. Install the clutch slave cylinder.
-
Twist and lock the slave cylinder.