F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
18. If equipped, disconnect the EGR vacuum regulator solenoid electrical and vacuum connections.
19. Remove the throttle body adapter.
^
Remove the four bolts.
^
Remove the throttle body adapter.
^
Remove and discard the throttle body adapter gasket.
20. Remove the generator.
21. Remove the two screws at the top of the fan shroud and position the fan shroud toward the engine.
22. Install the modular engine support bracket on the engine using the generator mounting holes.
23. Raise and support the vehicle.
24. Remove the engine mount nuts.
25. CAUTION: Damage to the TSS/OSS may occur and cause transmission or torque converter operational concerns if the transmission is raised
prior to removing TSS/OSS. Sensor bosses must be cleaned prior to removal and then plugged to prevent contamination from damaging internal
