F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
components.
If the vehicle is equipped with Turbine Shaft Speed (TSS) and Output Shaft Sensors (OSS), remove the sensors and install plugs in the
transmission.
26. Lower the vehicle.
27. Raise the engine using the Heavy Duty Engine Support.
28. Raise and support the vehicle.
29. Drain the engine oil and remove the oil bypass filter
30. Remove the dual converter Y-pipe.
31. Remove the flywheel inspection plate.
32. Install the High Lift Transmission Jack with the special tool to the transmission.
33. CAUTION: Support the transmission on the oil pan rails only or internal transmission damage can occur.
Support the transmission with a transmission jack.
34. Remove the driveshaft.