F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
![background image](/ford/f_450_2wd_super_duty/v8-6.4l_dsl_turbo/Page-770013.png)
15. NOTE: RH side shown, LH side similar.
If equipped, install the running boards and bolts.
^
Tighten to 13 Nm (115 lb-in).
16. Connect the retaining clip for the transmission cooler tubes at the frame.
17. Position back the ground strap and install the bolt.
^
Tighten to 25 Nm (18 lb-ft).
18. If equipped, position the transmission filter bracket assembly and install the transmission-to-engine bolts.
^
Tighten to 47 Nm (35 lb-ft).