F 450 2WD Super Duty V8-6.4L DSL Turbo (2008)
19. If equipped, connect the transmission cooler tubes at the external transmission filter.
^
Install the retaining clips.
20. If equipped, connect the transmission cooler tubes at the external filter.
^
Tighten to 40 Nm (30 lb-ft).
21. Position back the transmission cooler tubes on the stud and install the nut.
^
Tighten to 9 Nm (80 lb-in).
22. NOTICE: Only use hand tools when installing the transmission mount retaining nuts or damage to the transmission mount may occur.
Install the new transmission mount retaining nuts.
^
Tighten to 115 Nm (85 lb-ft).