F 450 4WD Super Duty V8-6.4L DSL Turbo (2008)
19. Position back the ground strap and install the bolt.
^
Tighten to 25 Nm (18 lb-ft).
20. Position back the transmission cooler tubes on the stud and install the nut.
^
Tighten to 9 Nm (80 lb-inch).
21. CAUTION: Only use hand tools when installing the transmission mount retaining nuts or damage to the transmission mount may occur.
Install new transmission mount retaining nuts.
^
Tighten to 115 Nm (85 lb-ft).