F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
Parking Pawl: Service and Repair
Park System
Removal
NOTE: For internal park mechanism service, refer to Manual Control Lever Shaft and Seal.
1. Remove the extension housing and the extension housing gasket.
2. Remove the parking rod guide plate.
1
Remove the bolts.
2
Remove the parking rod guide plate.
2. NOTE: If the installation of a new park gear is required, refer to Output Shaft-Check.
3. Remove the park pawl shaft.
1
Remove the park pawl return spring.
2
Remove the park pawl.
3
Remove the park pawl shaft.
Installation
1. NOTE: If the installation of a new park gear is required, refer to Output Shaft-Check.
1
Install the park pawl shaft.
2
Install the park pawl shaft.
3
Install the park pawl.
