F 550 4WD Super Duty V8-6.4L DSL Turbo (2008)
With the help of an assistant, lower the engine and the body at the same time.
8. Remove the straps and reposition the hoist to the frame of the vehicle.
9. Position the steering shaft into the housing. Install the new steering shaft bolt.
^
Tighten to 48 Nm (35 lb-ft).
10. Position back the master cylinder and bracket. Install the retaining nuts.
^
Tighten to 30 Nm (22 lb-ft).
11. Connect the brake tubes into the retaining clip.
12. Install the upper cooling fan shroud.
13. Install the air cleaner assembly.
14. Connect the retaining clip for the power steering cooler tube at the frame.