In-vehicle Repair Special Tool(s) | Universal flange holding wrench 205-072 (15030A) | | Remover, crankshaft oil seal 303-293 (21143) | | Installer, crankshaft oil seal 303-395 (21171) | Materials Name Specification Engine Oil WSS-M2C912-A1 Removal | -
Remove the timing belt. For additional information, refer to Timing belt in this section. | | -
CAUTION:Stop it from turning using the Special Tool. CAUTION:Only re-use the timing pulley bolts once. Remove the camshaft timing pulleys. - If necessary mark the timing pulley bolts with coloured paint.
- Renew any bolts that already have paint markings.
| | -
Remove the camshaft oil seal using the special tool. | Installation | -
Install a new camshaft oil seal using the special tool. - Coat the camshaft and the sealing lip of the camshaft oil seal with engine oil .
| | -
Attach the camshaft timing pulleys so that they can still just be turned. | | -
Install the timing belt. For additional information, refer to Timing belt in this section. | | |