Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Valve Seals >
< Crankshaft Front Seal
Fiesta 1996 (08.1995-02.2002)
Mechanical Repairs
3 Powertrain / 303 Engine
303-01D Engine - 1.8L Endura-DE (Kent) Diesel
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Auxiliary Shaft Seal
Engine - 1.8L Endura-DE (Kent) Diesel - Auxiliary Shaft Seal
Fiesta 1996 (08/1995-02/2002)
In-vehicle Repair
Materials
Name
Specification
Engine Oil
ACEA A3/B3
NOTE:
Immobilise the timing belt pulley with the old timing belt.
Remove the camshaft timing belt as described in Operation No. 21 304 0.
Slacken the bolt of the auxiliary shaft timing belt pulley.
Remove the timing belt side cover.
Remove the auxiliary shaft oil seal housing.
Installation
Install the auxiliary shaft oil seal housing.
Coat the auxiliary shaft bearing journal with engine oil.
Slide the new oil seal housing with the integrated oil seal and the plastic fitting bush onto the auxiliary shaft bearing journal.
Oil seal
Tighten the oil seal housing bolts.
Remove the support ring after installation and check that the seal is sitting correctly.
Fit the timing belt side cover.
NOTE:
The auxiliary shaft guide pin and the hole in the timing belt pulley must line up.
NOTE:
Immobilise the timing belt pulley with the old timing belt.
Fit the auxiliary shaft timing belt pulley.
Fit a new camshaft timing belt as described in Operation No. 21 304 0.
Mechanical Repairs
3 Powertrain / 303 Engine
303-01D Engine - 1.8L Endura-DE (Kent) Diesel
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Auxiliary Shaft Seal
Valve Seals >
< Crankshaft Front Seal