ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Accessory Drive Belt - Vehicles Built Up To: 01-1999 1.3L Endura-E (HCS) > < Accessory Drive

Fiesta 1996 (08.1995-02.2002)

Accessory Drive - Accessory Drive Belt—1.25L/1.4L Zetec-SE (Sigma) Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Remove the accessory drive belt splash shield.

  1. Detention the belt.
    • Turn the belt tensioner counterclockwise.
  1. Remove the belt.

Installation

  1. To install, reverse the removal procedure.
    • Ensure the correct location of the belt on the pulleys. Refer to Description and Operation in this section.

Accessory Drive Belt - Vehicles Built Up To: 01-1999 1.3L Endura-E (HCS) > < Accessory Drive