ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
303-06 Starting System|Specifications > < Starter Motor - 1.8L Endura-DE (Kent) Diesel

Fiesta 1996 (08.1995-02.2002)

Starting System - Starter Motor—1.8L Endura-DI (Lynx) Diesel Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.
  1. Remove the cooling fan motor and shroud. For additional information, refer to Section  303-03 Engine Cooling.

  1. Disconnect the starter motor electrical connector.

  1. Remove the starter motor.

Installation
  1. NOTE:
    NOTE:When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. It may need to be driven 16 km (10 miles) or more to relearn its adaptive strategy.
    To install, reverse the removal procedure.

303-06 Starting System|Specifications > < Starter Motor - 1.8L Endura-DE (Kent) Diesel