| Diagnosis and Testing Inspection and Verification - Verify the customer concern by operating the system.
- Visually inspect for obvious signs of mechanical or electrical damage.
Visual Inspection Chart | Mechanical | Electrical | - Fuel leak(s)
- Vacuum line(s)
- Sensor(s)
- Clutch pedal position switch (Vehicles Built from 02/2000)
| - Wiring harness
- Loose or corroded electrical connector(s)
- Powertrain control module
- Sensor(s)
- Clutch pedal position switch (Vehicles Built from 02/2000)
| - If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
- If the concern is not visually evident, verify the symptom and refer to WDS/FDS 2000 to diagnose the system.
|
