Removal and Installation Removal | -
Remove the audio control unit. For additional information, refer to Section 415-01 Audio Unit. | | -
Detach the heater control panel from the instrument panel. | | -
Remove the heater control panel. - Disconnect the electrical connectors.
- Detach the heater control cable.
| | -
Disconnect the electrical connectors. | | -
Remove the gear shift lever knob. | | -
Remove the gearshift lever boot and surround. | | -
Detach the central junction box from the instrument panel. - Remove the cover.
- Remove the central junction box screws.
| | -
Remove the instrument panel side trim panels (left-hand side shown, right-hand side similar). | | -
Detach the wiring harness from the vehicle body. | | -
NOTE:Fold the floor covering back to reveal the lower bolts. Remove the left-hand side instrument panel retaining bolts. | | -
Remove the right-hand side instrument panel retaining bolts. | | -
Remove the instrument panel upper retaining bolts. | | -
Detach the electrical connector from the cross car beam. | | -
Move the instrument panel rearwards. | | -
Detach the instrument panel wiring harness. | | -
Remove the instrument panel. | Installation | -
To install, reverse the removal procedure. | | |