| In-vehicle Repair Special Tool(s) | | Universal Flange Holding Wrench 205-072 (15-030A) | General Equipment Removal | | -
Remove the oil pan. For additional information, refer to Oil Pan - in this section. | | | -
CAUTION:Do not remove the crankshaft pulley at this stage. Using the special tool, remove the crankshaft pulley bolt. | | | -
Remove the accessory drive belt idler pulley. | | | -
Remove the oil pick-up pipe. | | | -
CAUTION:Only remove the oil pump together with the crankshaft pulley. CAUTION:Do not remove the crankshaft pulley from the oil pump after oil pump assembly removal. Remove the oil pump assembly. - Discard the pre-sealed oil pump retaining bolts.
| Installation | | -
CAUTION:Only install the oil pump together with the crankshaft pulley. CAUTION:When installing a new oil pump, do not remove the crankshaft pulley or the assembly clip before installation. NOTE:Install a new oil pump gasket. NOTE:A new oil pump is supplied as an assembly with a crankshaft front seal and a crankshaft pulley. NOTE:Do not tighten the bolts at this stage. Install the oil pump assembly. | | | -
Using the special tool, tighten the crankshaft pulley retaining bolt. - If installing a new oil pump, remove the assembly clip.
| | | -
NOTE:The oil pump sealing flange must be within ± 0.20 mm of the cylinder block bottom sealing flanges. Using a suitable straightedge, align the oil pump to the cylinder block sealing flanges. | | | -
NOTE:Install new pre-sealed bolts in position 1 and 3. Tighten the oil pump retaining bolts (engine shown removed for clarity). - Tighten the bolts in the sequence shown.
| | | -
NOTE:Make sure that the O-ring seal is correctly seated. Install the oil pick-up pipe. | | | -
Install the accessory drive belt idler pulley. | | | -
Install the oil pan. For additional information, refer to Oil Pan - in this section. | | |
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/15030A.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0033491.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0033489.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0029548.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0033490.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0028979.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0029550.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0029547.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0029510.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0029549.jpg)
/Description and Operation/Diagnosis and Testing/In-vehicle Repair//img/E0029623.jpg)