In-vehicle Repair Special Tool(s) | Compressor, Valve Spring 303-361A (21-155A) | | Adapter for 303-361A 303-361-02 (21-155-02A) | | Installer, Valve Stem Collets 303-362 (21-156) | | Pliers, Valve Stem Seal 303-508 (21-165) | Removal | -
Remove the cylinder head. For additional information, refer to: Cylinder Head (303-01D Engine - 2.0L Duratec-HE (MI4), In-vehicle Repair). | | -
Using the special tools, remove the valve springs. - Compress the valve spring.
- Remove the valve collets.
- Release the valve spring.
- Remove the valve spring retainer and the valve spring.
| | -
Using the special tool, remove the valve seals. | Installation | -
NOTE:Install new valve seals. NOTE:Cover the valve collet groove on the valve stem with a protective sleeve. Using the special tool, install the valve seals. - Remove the protective sleeve.
| | -
Using the special tools, install the valve springs. - Install the valve spring retainer and the valve spring.
- Compress the valve spring
- Install the valve collets.
- Release the valve spring.
| | -
Remove the special tools. | | -
Install the cylinder head. For additional information, refer to: Cylinder Head (303-01D Engine - 2.0L Duratec-HE (MI4), In-vehicle Repair). | | |