Removal and Installation | -
Remove the intercooler. For additional information, refer to: Charge Air Cooler - 1.6L Duratorq-TDCi (DV) Diesel (303-12 Intake Air Distribution and Filtering, Removal and Installation). | 2. Remove the components in the order indicated in the following illustration(s) and table(s). CAUTION:Close off the refrigerant lines and the condenser to prevent contamination. 1 - Nuts - refrigerant lines 2 - Refrigerant lines - condenser 3. To install, reverse the removal procedure. CAUTION:Do not damage the foam seals of the condenser. NOTE:Install new O-rings on the refrigerant lines. NOTE:Coat the O-rings for the refrigerant lines with clean refrigerant oil prior to installation. Removal Details Item 3 : Condenser core | -
Unclip the condenser and slide it upwards. | |