ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Rear Safety Belt Retractor - 3-Door > < Front Safety Belt Retractor - Vehicles Built From: 11-2004, 3-Door

Fiesta 2002.25 (11.2001-)

Safety Belt System - Rear Safety Belt Retractor—5-Door Fiesta 2002.25 (11/2001-)
Removal and Installation

Removal

  1. Remove the C-pillar trim panel. For additional information, refer to Section  501-05 Interior Trim and Ornamentation.

  1. CAUTION:
    CAUTION:The bolt securing the safety belt anchor is held captive by a paper washer. The bolt, spacer and paper washer must remain on the safety belt anchor at all times when the safety belt is detached or removed.
    Detach the safety belt upper anchor from the D-pillar.

  1. Remove the rear safety belt retractor.
    1. Remove the retaining bolt.
    1. Lift the retractor to detach the locating tangs.

Installation

  1. CAUTION:
    CAUTION:Make sure the safety belt retractor locating tangs are correctly located.
    To install, reverse the removal procedure.

Rear Safety Belt Retractor - 3-Door > < Front Safety Belt Retractor - Vehicles Built From: 11-2004, 3-Door