Flex AWD V6-3.5L (2009)
Entertainment System Control Panel: Service and Repair
Front Display Interface Module (FDIM)
Front Display Interface Module (FDIM)
NOTE: Without navigation shown, with navigation similar.
Removal and Installation
1. NOTE: Module configuration is required when a new Front Display Interface Module (FDIM) is being installed.
Upload the FDIM configuration information to the scan tool.
2. Remove the center instrument panel finish panel.
3. NOTICE: For vehicles with navigation, make sure not to bend the FDIM video feed cable when removing the FDIM.
Remove the 4 screws and the FDIM.
-
Disconnect the electrical connector.
4. To install, reverse the removal procedure.
-
Download the configuration information to the FDIM.