Flex AWD V6-3.5L (2009)
20. Install the PSP tube bracket-to-power steering pump bolt.
-
Tighten to 10 Nm (89 lb-in).
21. Connect the PSP switch electrical connector.
22. Install the ground cable bolt.
-
Tighten to 12 Nm (106 lb-in).
23. Attach the wiring harness retainer to the engine mount bracket stud bolt.
24. Install the RH and LH valve covers. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service
and Repair/Valve Cover - LH and Valve Cover - RH See: Cylinder Head Assembly/Valve Cover/Service and Repair/Valve Cover - RH.
25. Connect the hose to the power steering reservoir.
