Flex AWD V6-3.5L (2009)
31. Install the RH inner fender splash shield.
32. Connect the power steering cooler tube.
Vehicles with rear A/C
33. Install the new O-ring seal, A/C tube and the nut.
-
Tighten to 15 Nm (133 lb-in).
34. Install the new O-ring seal, A/C tube and the nut.
-
Tighten to 15 Nm (133 lb-in).
All vehicles
35. Install a new O-ring seal and the A/C tube-to-receiver/drier and the bolt.
-
Tighten to 15 Nm (133 lb-in).
36. Using new O-ring seals, connect the A/C tubes and install the 2 nuts.
-
Tighten to 15 Nm (133 lb-in).