Flex AWD V6-3.5L (2009)
18. Attach the backrest trim cover lower J-clips.
19. Seats with manual track, route the side air bag module wire harness under the seat.
20. Attach the outboard cushion trim cover J-clips and install the pin-type retainer.
21. Seats with manual track, connect the electrical connector and attach the pin-type retainers under the seat.
1. Connect the side air bag module electrical connector and slide the locking clip to the lock position.
2. Route the wire harness and attach the side air bag module electrical connector and wire harness retainers.
22. Seats with power track, connect electrical connectors and attach the pin-type retainers under the seat.
1. Connect the side air bag module electrical connector and slide the locking clip to the lock position.
2. Connect the backrest feed electrical connector.
3. Route the wire harness and attach the connectors and wire harness retainers.
